Models
Over the years many of the model manufacturers have produced items that were built in Leeds. Some of these you would need to change the locomotive number so as to represent one from a Leeds batch but others are most definitely Leeds built items.
Some of the items listed might be no longer available or have yet to be produced by the manufacturer.
Below is a selection of items produced, where a manufacturer has changed the livery over the years we only list the model type rather than a long list of items. Older items may be found in model shops or on internet based auction sites. Kits are available from many good shops and often from the maker.
| Scale | Manufacturer | Description |
|---|---|---|
| 1/76, 1/148 | Bachmann/Grafar | Leeds Forge - RECTANK/Parrot wagon |
| 1/148 | Base Toys | Leyland Atlantean AN68/Park Royal-Roe bus |
| 1/148 | EFE Rail | Hunslet Austerity |
| 1/76, 1/148 | Newman Miniatures (Shapeways) | Kitson "Lion" |
| 1/148 | Newman Miniatures (Shapeways) | Hunslet Sweet Pea 4wDM |
| 1/76, 1/148 | Newman Miniatures (Shapeways) | Steam tram - similar to Kitson |
| 1/148 | Newman Miniatures (Shapeways) | Lartigue monorail |
| 1/148 | Oxford Diecast | Utility bus (Generic utility model but almost identical to the examples built by Roe) |
| 1/148 | Parkwood Models | Resin body for Hudswell Clarke 0-6-0DM similar to BR D2511 |
| 1/32, 1/43, 1/76, 1/87, 1/100, 1/148 | Recreation21 (3D print) | Derwent Valley Rly Ford railcar body by C H Roe |
| 1/32, 1/43, 1/76, 1/87, 1/100, 1/148 | Recreation21 (3D print) | Spurn Head Rly Hudswell Clarke railcar |
| 1/32, 1/43, 1/64, 1/76, 1/87, 1/100, 1/148 | Recreation21 (3D print) | Manning Wardle 0-6-0ST L |
| 1/148 | ReveloutioN | Hunslet 0-6-0DH |
| 1/148 | RT Models | Hudson tipper wagon kit, etch only |
| 1/32, 1/43, 1/76, 1/87, 1/100, 1/148 | Rue d Etropal | 3D print body for Hudswell Clarke P265 Spurn Hunsletad Rly railbus |
| 1/32, 1/43, 1/55, 1/76, 1/87, 1/100, 1/148 | Rue d Etropal | 3D print for the Manning Wardle locos that ran on the Ravenglass and Eskdale wHunsletn it was 3' |
| 1/32, 1/43, 1/55, 1/76, 1/87, 1/100, 1/148 | Rue d Etropal | 3D print for the Hudswell Clarke tank loco supplied to Guinness brewery, Dublin. 3 is preserver at Whitehead |
| 1/32, 1/43, 1/55, 1/76, 1/87, 1/100, 1/148 | Rue d Etropal | 3D print for the Hudswell Clarke diesel loco supplied to Guinness brewery, Dublin. |
| 1/32, 1/43, 1/55, 1/76, 1/87, 1/100, 1/148 | Rue d Etropal | 3D print for Roe body as used by Derwent Valley Ford railbus |
| 1/32, 1/43, 1/55, 1/76, 1/87, 1/100, 1/148 | Rue d Etropal | 3D print for North Sunderland rly Manning Wardle L 0-6-0ST |
| 1/43, 1/76, 1/148 | Small Loco Works (Shapeways) | EBW Jenny Lind |